Cooper 9940 Przewodnik Instalacji Pobierz pdf (Strona 6)

Page 6 11681330 Issue 1

Fitting a 9940 or 9941 Keypad

Figure shows the backplate and the position of mounting holes.

1. Cable entry. 3. Back tamper aperture.

2. Mounting holes. 4. Sounder aperture.

Figure 3. Backplate of 9940/9941 Keypad

Cooper Security recommend that you mount the keypad using M4/M3.5 screws

as follows:

1. Select which cable entry you are going to use and break out the appropriate

plastic sections.

2. Hold the backplate in place against the wall and mark the position of one

ﬁxing hole.

3. Drill and plug the hole, and screw the backplate to the wall. Do not tighten

the screw completely home.

4. Make sure the backplate is level and mark, drill and plug at least two other

ﬁxing holes. Screw the backplate to the wall through the ﬁxing holes.

6. Mount the front of the keypad (containing the keypad pcb) onto the backplate

and make sure that the tamper switch operates.

1 2 3 4 5 6 7 8

Brak uwag

Cooper 9940 Przewodnik Instalacji Strona 6