Cooper M3000 Podręcznik Użytkownika Pobierz pdf (Strona 382)

B-2 SPARC Enterprise Mx000 Servers XSCF User’s Guide • December 2010

The showlogs(8) error option displays fault information in a format specific to the

platform. Conversely, the fmdump command displays fault information in a format

compatible with the Oracle Solaris OS. This latter command is provided for users who are

familiar with the Oracle Solaris OS. When the log is referenced by these two commands,

there is a difference in display format but little difference in the information. Use these

commands in the following cases:

■ To check whether a fault occurred if a message is output to the domain console and XSCF

console. (See Appendix A.)

■ To check whether the information is fault information if it was reported to the previously

registered email address.

■ To check whether the information is fault information if TRAP occurred in the SNMP

manager.

Using the showlogs(8) Command to Confirm a Fault

1. Specify the error option on the XSCF Shell and perform the showlogs(8) command

to reference the XSCF error log.

(The layout of the command example is subject to change without previous notice for

functional improvement.)

In the example above, the following items are displayed:

■ Time at which each problem was logged (Date). This date is indicated in local time.

■ DIAGCODE that the field engineer and authorized service personnel use for

troubleshooting (Code). The user is requested to inform the field engineer and authorized

service personnel of this Code. This is useful in settling the problem at an early stage.

■ Fault level of the component (Status). One of the following items is displayed:

XSCF> showlogs error

Date: Mar 30 15:45:31 JST 2005 Code: 00112233-44556677-8899aabbcceeff00

Status: Warning Occurred: Mar 30 15:45:26.000 JST 2005

FRU: PSU#1,PSU#2

Msg: ACFAIL occurred (ACS=3)(FEP type = A1)

Date: Mar 30 17:45:31 JST 2005 Code: 00112233-44556677-8899aabbcceeff00

Status: Alarm Occurred: Mar 30 15:45:26.000 JST 2005

FRU: PSU#1,PSU#2,*

Msg: ACFAIL occurred (ACS=3)(FEP type = A1)

Alarm: The relevant component failed.

Warning: Some subcomponents in the relevant component failed or degraded.

Information: Notification.

Notice: System state notification.

1 2 ... 377 378 379 380 381 382 383 384 385 386 387 ... 431 432

Brak uwag

Cooper M3000 Podręcznik Użytkownika Strona 382