Cooper TS690 Instrukcja Instalacji Pobierz pdf (Strona 4)

Overview

Introduction

The TS690 range of alarm control systems have

been designed to suit small to medium installation

sites. The TS690 system can monitor 6 zones locally

and up to 8 zones via remote keypads or LECs. All

zones can be wired either as double pole or end

of line. The TS690ID system can monitor up to 30

zones via ID biscuits and 8 conventional zones via

remote keypads or LECs.

Both systems feature local “downloading" via a

DCI link and PC, or remote “downloading” via a

plug-on digi-modem (DC6) and PC.

Control Panel

The control panel is the controlling unit for the

system, it has a power supply and connections for

a standby battery. It has the following facilities:

6 programmable detection circuits (TS690

only)

l Detector loop for connecting up to 30

programmable ID biscuits (TS690ID only)

Bell and strobe outputs

3 programmable outputs (1 x Voltage free

contacts and 2 high current transistorised)

5 programmable digicom/RedCARE outputs

A connector for a plug-on digi-Modem (DC6)

Extension loudspeaker output

All system program information and the 700

event log is stored in a removable non-volatile

memory (NVM)

15 user codes + engineer's code

7.0Ah battery capacity

Remote Keypads

Up to 4 remote keypads can be connected to the

control panel. Each remote keypad has two

detection circuits and a single switched -ve

output. All remote keypads have “Power LED” and

a programmable “Function LED” (the “Function

LED” may be programmed as “Fault” or “Area Set”

etc.). There are four types of remote keypads that

can be used:

32 Character LCD (NETLCD)

The NETLCD remote keypad has a backlit 32

character super-twist Liquid Crystal Display (LCD)

and a backlit tactile rubber keypad. When using

the LCD Keypads the text for user codes, part

setting modes and circuit identification can be

programmed to make the operation and

programming of the system easier.

8 Character Starburst (NETSTAR)

The NETSTAR remote keypad has a backlit 8

character starburst display (LCD) and a backlit

tactile rubber keypad.

4 Character LED (NETLED)

The NETLED remote keypad has a 4 character LED

display and backlit tactile rubber keypad. When

using the LED remote keypads, text cannot be

programmed but all other system functions are

available.

Remote Arming Station (NETARM)

The NETARM remote arming keypad does not

have a display and can only be used for setting,

part setting and unsetting of the system.

Proximity Reader (TSNETPROX)

You can fit a TSNETPROX proximity reader to the

NETLCD, NETARM and NETLED keypads to allow

users to set and unset the system using a proximity

tag.

TS700 LEC

The Local Expansion Card (LEC) provides two

programmable detection circuits and one

programmable output.

Overview TS690 & TS690ID Installation Manual

1 2 3 4 5 6 7 8 9 ... 59 60

Komentarze do niniejszej Instrukcji

Brak uwag

Cooper TS690 Instrukcja Instalacji Strona 4

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Systemy kontroli dostępu bezpieczeństwa Cooper TS690