Cooper DF6000 Instrukcja Użytkownika Pobierz pdf (Strona 15)

DF6000 - USER MANUAL

Shop Unit Interface - MSU840

MSU840 accepts a zone of conventional detectors plus an unlimited number of callpoints which can be

connected to the same input as the detectors or a separate callpoint input if requir

ed. There is also a

facility to connect a power supply, which can then be monitored for fault.

In addition it has the facility to connect two circuits of conventional polarised sounders, which are

monitored by means of an end of line resistor and powered in alarm conditions from the external power

supply. The sounder circuits can be programmed to operate in pulsed, continuous or time delayed mode.

Please refer to local standards e.g. BS5839 Pt 1:2002 for details of the maximum allowable area to be

covered by a single spur / zone.

Note: This unit must always be used with a 24 V power suply

Section 1 - System Installation and Design

Shop unit Interface

MSU840

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 113 114

Brak uwag

Cooper DF6000 Instrukcja Użytkownika Strona 15